4.59  Very good
  • KNX & DALI Consulting: +49 (0) 451 989 030
  • Invoice purchase
  • 30-day return policy
  • Trusted Shops buyer protection
UBIQUITI UniFi UA-G2-Black PoE NFC Card Reader 2nd Generation | black

UBIQUITI UniFi UA-G2-Black PoE NFC Card Reader | 2nd Generation | black

Manufacturer: UNIFI
Article no.: 20086282
EAN: 0810084692356
Manufacturer item number: UA-G2-Black
Manufacturer type: UA-G2-Black
Weight: 0,082 kg
In stock
Delivery: 4-8 business days
Electrical appliance take-back
pcs
Compact second-generation NFC card reader and prompt device that supports door unlocking with a hand wave.

  • Unlock with an NFC card or the mobile UniFi Identity app
  • Additional hand wave unlock function
  • Welcome messages for entry and exit
  • Connects to the UniFi Access Hub via PoE
  • Weather resistance IP55 (-30 to 45° C)


Technical Specifications

Mechanical

  • Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
  • Weight: 82 g (2.9 ounces)
  • Housing material: Polycarbonate, glass
  • Mounting: In the wall, distribution box
  • Weatherproof: IP55
Hardware

  • Network interface: (1) 10/100 MbE RJ45 port
  • Connectivity: BLE 4.1
  • Power method: PoE
    UL 294 Class 2 power-limited power supply
    UL 60950-1/62368-1 LPS/PS2 power supply
  • Supported voltage range: 48V DC
  • Max. power consumption: 5W
  • ESD/EMP protection: Air: ±15kV, Contact: ±8kV
  • Sensors: Proximity sensor
  • Speaker: (1) 8 Ohm, 0.7 W
  • LEDs: R/G/B/W
  • Button: (1) Factory reset
  • NFC frequency: 13.56 MHz
  • NFC reading range: < 30 mm
  • NFC standards: ISO 14443A, 14443B, 15693
  • NFC technology: NFC Tag 1,2,3,4,5
    MIFARE Classic
    MIFAREPlus
    MIFARE Ultralight
    MIFARE DESFire
  • Operating environment: Outdoor use
  • Operating ambient temperature: -30 to 45 °C (-22 to 113 °F)
  • Operating ambient humidity: 5 to 90 % non-condensing
Software Information

The software version of a product can be checked at https://unifi.ui.com

  • UL 294 level: Destructive attack: Level I
    Line security: Level I
    Endurance: Level I
    Standby power: Level I
  • UL 294 statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
    The device is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, power sources for Class 2 and 3 circuits.
  • PoE cabling requirements: Cat 5e cabling is the recommended minimum performance category. The power class used should match the transmission speed required at the installation site.
    The minimum allowable conductor cross-section for the connection between the PSE or power injector and the PD is 26 AWG (0.13 mm 2) for patch cables; 24 AWG (0.21 mm 2) for horizontal or riser cables.
  • CAN/ULC-60839-11-1 class: Grade assignment: I
  • Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
  • Document number and issue date and/or revision status: UA-G2/UA-G2-Black, V02
LED

  • System: Steady blue: Adopted/device is ready.
    Steady white: Adoption pending.
    White/blue
    blinking: Firmware is updating. Red blinking: Emergency lock
Software

  • Management application: UniFi Access: Version 1.5.9 and higher
Brand
UNIFI
Manufacturer item number
UA-G2-Black
Manufacturer type
UA-G2-Black
Manufacturer information
UNIFI
Ubiquiti International Holding B.V.
Ekkersrijt 3102
5692 CC Son En Breugel
NL

legal@ui.com
help.ui.com