• KNX & DALI Consulting: +49 (0) 451 989 030
  • Invoice purchase
  • 30-day return policy
  • Trusted Shops buyer protection

SHELLY W i4 Z-Wave push-button interface flush-mounted

Manufacturer: SHELLY
Article no.: 20103226
EAN: 3800235269077
Manufacturer item number: Shelly_W_i4
Manufacturer type: W i4
Weight: 0,1 kg
Available on request
Electrical appliance take-back
pcs
Z-Wave™ Controller with 4 Digital Inputs for Enhanced Action Control

Manually activate or deactivate any created scene, perform synchronised actions, or execute complex trigger scenarios.

  • Wave i4 is an input reading device (it contains no relays).
  • Manually control other Z-Wave devices (e.g. with a multi-button switch).
  • Multi-click – activation of up to 12 actions
  • Extremely low power consumption: < 0.2 W
  • Z-Wave frequency band: 868.4 MHz (CEPT countries).
  • Latest technology: Z-Wave 800 series
  • Automatic setup with SmartStart
  • Security 2 Authenticated for highest security
  • Over-the-Air firmware updates
  • Works with Z-Wave certified gateways and over 4,000 Z-Wave devices

A gateway (Smart Hub) is not included. A gateway (Smart Hub) is required to configure the device.

WHY WAVE i4?

Replace a switch in your room and control all other installed Z-Wave devices!

With Wave i4, you can manually activate or deactivate any created scene, perform synchronised actions, or execute complex trigger scenarios. You can control other Z-Wave devices in your network with the push of a button. Thanks to its retrofit design, it is small enough to fit behind any wall switch. Wave i4 can display status and control the action of four inputs, offering maximum convenience by enabling all family members to manually control your smart home.

INTRODUCTION TO Z-WAVE

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can communicate seamlessly via a central smart hub, regardless of their brand or platform! Shelly Qubino devices operate with the latest Z-Wave chip generation (S800), one of the most popular standardised smart home technologies worldwide.

Certain requirements apply for the proper functioning of Z-Wave devices, such as the need to use a supported Z-Wave hub.

For more information, visit the official Z-Wave website: www.z-wave.com

Works with any Z-Wave gateway

Wave i4 is retrofit-capable and designed to fit behind switches/buttons. After installation, include the device in your Z-Wave network (Z-Wave gateway required) and control it via your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways.

Functionalities

Z-Wave powered

Include Wave i4 in your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways.

Multi-click support

Up to 12 possible actions. Control lights, close blinds, and switch off sockets. Manually control any Z-Wave device in your network and execute desired scenes.

Wide voltage support

Wave i4 can be powered with 110–240 V AC.

Associations

Set up direct communication between devices in your local Z-Wave network and define actions without a hub! Configure up to 8 associations on the switch buttons and trigger them manually.

Smart scenes

Create custom scenes by combining Wave i4 with other Z-Wave devices (gateway required).

Endless applications

Support for multiple actions

With a simple press, you can activate up to 12 scenes or actions from other Z-Wave devices in your network. Wave i4 supports up to 3 different automation actions per button, making quick manual control of a group of devices extremely convenient.

Install Wave i4 wherever it is most convenient for you and set up buttons to simultaneously control lights, blinds, and other devices in specific rooms or throughout the building.

Scene activation:

1 click
Turn off multimedia devices
2 clicks
Close blinds
1 long click (hold)
Turn hallway light on/off

Trigger up to 8 actions without a gateway!

With Wave i4, you can establish direct communication between your Z-Wave devices and set various associations without a hub! Supporting 2 associations per button, Wave i4 can trigger and execute up to 8 actions, seamlessly controlling multiple Z-Wave devices with a simple push of a button.

Examples:
1 click (for basic commands)
Turn lights on/off
1 long click (hold) (for multi-level commands)
Dim the lights or open/close blinds
Gateway/Hub is required for device configuration.

Ultimate convenience

One of the most frustrating things is realising you forgot to turn off the living room light before going to bed—especially when your phone is nowhere near. But there’s no need to worry! Wave i4 enables manual control of other Z-Wave devices with a switch. Now full control of your home is just a hand away!

Control complex scenes

Manually activate or deactivate complex scenes. With Wave i4, you can perform synchronised actions of multiple Z-Wave devices. You can install Wave i4 near your front door and turn all the lights in your home on or off with a single button press. This saves you time when you’re in a hurry.

Perfect match

Wave i4 is perfect for Shelly Wall Switch for Smart Relays – a 4-button switch. Each button can activate up to 4 different actions. This means that with just one 4-button switch, up to 16 scenes can be triggered and executed! Thanks to its compact dimensions and simple wiring, Shelly Wall Switch fits into any existing switch console or even the smallest spaces. No wall area extension or wiring changes required!

Specifications

  • Power supply: AC 110-240 V, 50/60 Hz
  • DC power supply: NO
  • Power consumption: < 0.2 W
  • Surge protection: NO
  • Power measurement: NO
  • Works without neutral conductor: NO
  • Number of inputs: 4
  • Range: up to 40 m indoors (depending on local conditions)
  • Z-Wave repeater: Yes
  • CPU: Z-Wave S800
  • Z-Wave frequency band: 868.4 MHz
  • Maximum transmitted RF power in frequency bands: < 25 mW
  • Size (H x W x D): 37 x 42 x 16.5 mm / 1.46 x 1.65 x 0.63 in
  • Weight: 17 g / 0.6 oz
  • Mounting: Wall console
  • Screw terminal max. torque: 0.4 Nm / 3.5 lbs
  • Conductor cross-section: 0.5 to 1.5 mm² / 20 to 16 AWG
  • Length of stripped conductor: 5 to 6 mm / 0.20 to 0.24 in
  • Housing material: Plastic
  • Colour: Orange
  • Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F
  • Humidity: 30 % to 70 % relative humidity
Amazon Alexa
No
Apple HomeKit
No
BAB-Tec
No
Bluetooth
Yes
Brand
SHELLY
Casambi
No
Class
switching actuators
DALI
No
Different bus system
No
ENOcean
No
free@home
No
Gira One
No
Google Assistant
No
Hager KNXeasy
No
Home Assistant
No
Installation location
Wall
JUNG HOME
No
KNX
No
KNX-RF
No
KNX-Secure
No
KNX-TP
No
Manufacturer item number
Shelly_W_i4
Manufacturer type
W i4
Matter
No
Mbus
No
Modbus
No
Modbus RTU
No
Modbus TCP
No
Mounting type
Flush-mounted
Samsung SmartThings
No
Shelly
Yes
Siemens LOGO!
No
Theben LUXORliving
No
Thread
No
Type of transmission
Cable
Wi-Fi
Yes
Wiser Home
No
with Netatmo
No
Zigbee
No
Manufacturer information
SHELLY
SHELLY EUROPE LTD
103 Cherni Vrah Blvd.
1407 Sofia
BG

office.bg@shelly.com
www.shelly.com

There are no reviews for this product yet.

Already bought this item? Share your experience with other customers.

Write the first review