ISOLED 115627 LED strip TW 5 m roll | 14 W/m, 1900-6000 K, IP20

You want a light strip that adapts at any time to mood and task: This ISOLED Tunable-White LED strip brings warm candlelight through to clear, cool task lighting on a continuous 5 m roll. With high colour rendering, colours appear more natural, and thanks to 24 V DC, the strip can be neatly integrated into many LED systems.

• White dynamics: You can flexibly set the light colour from 1900 K to 6000 K, so the very same LED strip covers everything from cosy warm to cool and functional lighting.
• Bright light line: For visibly strong light, the flexible strip delivers 1850 lm/m, making even longer lines suitable as functional lighting.
• Efficiency with a clear comparison figure: With 14 W/m, you get a well-classifiable power value that, together with the luminous flux, makes the brightness per metre transparent.
• Good colour rendering: With a CRI of 90, surfaces, food, wood and textiles appear more true to colour, which makes a particular difference for accent and task lighting.
• Fine light image: 256 LEDs/m support a more even light line, and a 120° beam angle distributes the light widely over surfaces and diffusers.
• Planable and cuttable: The cut point is at 62.5 mm, allowing you to adjust lengths practically without making the grid too coarse.

Light effect

As a Tunable-White LED strip (white dynamic), this flexible strip is designed to actively change light colours: warm light at the lower end for relaxed evenings, more neutral tones for everyday situations, and cool settings for focused work. The luminous flux of 1850 lm/m provides clear guidance on how bright one metre actually shines, making it easier to compare with other LED strips in the same category. With a CRI of 90, the light quality remains high for everyday use because colours appear less "grey" or distorted, which quickly becomes visible in kitchens, living rooms, hallways, furniture niches or shelves.

Technology & connection

The strip operates at 24 V DC and is typical for linear LED systems where stable brightness and clean cable lengths are important. The strip is dimmable via PWM, allowing sensitive control of brightness and light mood without losing the light colour itself. The IP20 protection rating is suitable for dry indoor areas, i.e. anywhere without splash water. Practical for integration: connection is via a cable, and the connection cable is on one side only, which influences the alignment in continuous lines and feed-in points.

Installation & dimensions

The strip is slim for tight installation situations: 10 mm wide and 1.4 mm high, helping it fit into many profiles, grooves and flat shadow gaps. The roll is 5 m long, a common unit for continuous lines, and can be cut into suitable sections using the 62.5 mm spacing if needed. For mounting, a 3M 300LSE adhesive tape is integrated so you can place the strip directly and evenly on suitable substrates; for long and stable use, a minimum cooling mass of 75 g/m is also specified because LED strips maintain their light output and lifespan better when heat is reliably dissipated. The service life is 53,000 h (L70|B10), aiming for a permanently designed lighting solution for many operating hours, and the warranty is 5 years.

Selection criteria

Four points are especially decisive for LED strips to ensure the result really fits later: First, the desired light effect, here covered by the white range from 1900 K to 6000 K if you want to combine mood lighting and task lighting in one strip. Second, the brightness per metre, here 1850 lm/m, as it determines whether the strip mainly provides accents or can also act as main lighting. Third, the electrical basis, here 24 V DC and 14 W/m, because this determines the appropriate dimensioning per metre and system design for even lines, especially when operating several metres. Fourth, the protection rating: IP20 is intended for dry indoor rooms, while other protection ratings would generally be relevant for damp rooms or outdoor use. For a neat light strip in profiles, the LED density is also a noticeable quality factor, and with 256 LEDs/m, the light line appears more even in many applications, especially behind covers or diffusers. If you want to cut the strip exactly to furniture dimensions, steps, niches or lines in interior construction, the 62.5 mm cut point helps because you can adjust lengths finely enough without creating large leftover pieces.

Manufacturer

ISOLED stands for LED lighting solutions and has offered a standardised range with well over 3,550 articles as well as project-oriented lighting concepts since 2008. The focus is on modular systems around LED technology, where flexible strips, profiles, controls and accessories fit together in practice. Thanks to the wide selection within the product worlds, light lines for different requirements such as living spaces, work areas or interior construction can be implemented consistently. ISOLED aims to provide high-quality and future-oriented LED lighting solutions that can be adapted to different applications.