4.61  Very good
  • KNX & DALI Consulting: +49 (0) 451 989 030
  • Invoice purchase
  • 30-day return policy
  • Trusted Shops buyer protection
ELTAKO FTFB-wg Wireless Temperature and Humidity Sensor with battery | pure white shiny

ELTAKO FTFB-wg Wireless Temperature and Humidity Sensor | with battery | pure white shiny

Manufacturer: ELTAKO
Article no.: 20056269
EAN: 4010312319147
Manufacturer item number: 30000559
Manufacturer type: FTFB-wg
Weight: 0,033 kg
Available on request
Electrical appliance take-back
pcs
Radio temperature and humidity sensor, pure white glossy and anthracite matt 75x25x12 mm, with battery (lifespan 5 years). Smart Home sensor. The radio temperature and humidity sensor measures the relative humidity between 0 and 100% (±5%) and the temperature between -20°C and +60°C (±0.5°C). It sends a data telegram to the ELTAKO building radio within 2 minutes of a change. If no change occurs, a status telegram is sent every 10 minutes. Attachment by adhesive; an adhesive film is included. The electronics are powered by an internal CR2032 button cell. To replace it, simply open the housing. This is also necessary to activate the battery supply by pulling out an insulating strip. The radio sensor can be taught into the following actuators and imController: FAE14, FHK14, F4HK14, F2L14, FHK61, FME14.
Air pressure sensor
No
BAB-Tec
No
Bluetooth
No
Brand
ELTAKO
Brightness sensor
No
Casambi
No
Class
Measuring devices
CO2 sensor
No
Colour
white
DALI
No
ENOcean
Yes
fits in 55 switch range
No
free@home
No
Gira One
No
Hager KNXeasy
No
Humidity sensor
Yes
JUNG HOME
No
KNX
No
KNX-RF
No
KNX-Secure
No
KNX-TP
No
Manufacturer item number
30000559
Manufacturer type
FTFB-wg
Mounting type
Surface-mounted
Shelly
No
Siemens LOGO!
No
suitable for installation in switch ranges
No
Surface
glossy
Temperature sensor
Yes
Theben LUXORliving
No
Type of transmission
radio
VOC sensor
No
Wi-Fi
No
Wiser Home
No
with Netatmo
No
Zigbee
No
Manufacturer information
ELTAKO
Eltako GmbH
Hofener Str. 54
70736 Fellbach
DE

info@eltako.de
www.eltako.com/de/

Hints
  • Bei einem nicht steckerfertigen elektrischen Gerät oder Bauteil dürfen Anschluss und Installation nur von einer qualifizierten Elektrofachkraft durchgeführt werden. Bitte beachte auch die Gebrauchsanweisung.
Recycling & disposal
Informationen zum Bereich Recycling & Entsorgung findest du hier: https://www.voltus.de/umweltschutz/.