• KNX & DALI Consulting: +49 (0) 451 989 030
  • Invoice purchase
  • 30-day return policy
  • Trusted Shops buyer protection

B.E.G. 92902 LUXOMAT Mini ceiling presence detector PD9 | Slave, 1-fold

Manufacturer: B.E.G.
Article no.: 20010560
EAN: 4007529929023
Manufacturer item number: 92902
Manufacturer type: PD9-1C
Weight: 0,167 kg
Available on request
Electrical appliance take-back
Motion Detector PD9-1C-DE

Type: Motion detector, sensor type passive infrared, forced switch-on, forced switch-off, anti-tamper/field monitoring, scanning angle 360°, optimal mounting height 2.5 m, staircase monitoring, max. range to one side 5 m, max. presence area 12 m², max. frontal range 6 m, detection field diameter on floor 10 m, suitable for ceiling mounting, mounting type other, connection type plug terminal, material plastic, material quality other, halogen-free, surface protection untreated, surface finish matt, colour white, RAL number (similar) 9010, protection class (IP) IP20, impact resistance IK03, voltage type AC, frequency 50 ... 60 Hz, rated voltage 240 V, minimum switch-on duration 30 s, maximum switch-on duration 30 min, switch-off delay 0 s, switch-on delay 0 s, horizontal detection angle 0 ... 360°, response brightness 0 ... 2000 lx, max. switching capacity 1000 W, max. switching capacity LED 200 W, temperature range -25 ... 50 °C, number of switching zones 78.
Acoustic sensor
No
Air pressure sensor
No
Area
Inside
Brand
B.E.G.
Brightness sensor
Yes
Class
Presence detector
CO2 sensor
No
Colour
White
Crawl protection
Yes
DALI-2
No
Detection angle in °
360
Detection area
circular
Detection type/sensor type
Passive infrared
fits in 55 switch range
No
Frontal range in m
6
Humidity sensor
No
Installation height in m
2.5
Integrated constant light control
No
LED night light
No
Manufacturer item number
92902
Manufacturer type
PD9-1C
Material
Plastic
Mounting type
Built-in
Number of areas
1
Protection class (IP)
IP20
Reach laterally in m
5
Remote controllable
No
suitable for ceiling mounting
Yes
suitable for installation in switch ranges
No
suitable for wall mounting
No
Surface
matt
Temperature sensor
No
VOC sensor
No

The following links may lead to external websites. Voltus cannot be held responsible for the accuracy or timeliness of external content.

Manufacturer information
B.E.G.
B.E.G. Brück Electronic GmbH
Gerberstr. 33
51789 Lindlar
DE

vertrieb@beg.de
www.beg-luxomat.com/de/

Hints
  • Bei einem nicht steckerfertigen elektrischen Gerät oder Bauteil dürfen Anschluss und Installation nur von einer qualifizierten Elektrofachkraft durchgeführt werden. Bitte beachte auch die Gebrauchsanweisung.
Recycling & disposal
Informationen zum Bereich Recycling & Entsorgung findest du hier: https://www.voltus.de/umweltschutz/.