SONOFF M5-1C-80W Matter Touch Sensor UP | single | white matte | 80x80 mm

The SONOFF M5 Matter Flush-Mount Touch Sensor offers a well-thought-out design for easy integration into existing systems and enables convenient control of lighting and electrical devices via physical buttons as well as a companion app.

• Flush-Mount Installation: The touch sensor is designed for installation in a separately available frame for flush mounting.
• Matter Compatibility: Supports the Matter protocol for easy integration into Matter-enabled smart home systems.
• Physical Button Control: Allows manual switching of lighting and electrical devices via a single button.
• App Control via eWeLink: Remote control and management of connected devices worldwide through the eWeLink app.
• Dimensions: Compact dimensions of 86 x 71 mm, suitable for standard flush-mounted boxes.
• Matte White: Matte white colour for unobtrusive integration into various room designs.
• Wired Transmission: Control is carried out via wired interfaces for stable communication.

The SONOFF M5-1C-80W Matter Flush-Mount Touch Sensor is a simple, single-gang wall switch for controlling lighting and electrical devices in residential environments. It serves as a physical control point through which users can manually trigger switching operations. The switch is intended for flush mounting and requires a separately purchased frame for installation, allowing it to be integrated into existing installation systems. Its design with a width of 41.5 mm, a height of 71 mm, and a length of 86 mm corresponds to the common dimensions for modular installation devices.

The central function of the device is the manual switching of loads via a single touch sensor. The switch allows turning connected loads on and off with a maximum power of 80 watts. Operation is via a physical button, enabling direct and intuitive control without additional control devices.

The SONOFF M5-1C-80W supports the Matter protocol, which enables cross-manufacturer networking and control of smart home devices. Via Matter, the touch sensor can be integrated into a compatible smart home system and thus also operated via app or voice control. Integration is done via a wired interface used for transmitting switching signals. Other protocols such as KNX, DALI, Zigbee, or WLAN are not supported.

Operation can be carried out not only via the physical touch sensor but also via the eWeLink app, which enables remote control of connected devices. This allows the user to monitor and change the switching status from any location. The app additionally offers the possibility to programme switching times and integrate devices into scenes, allowing a degree of automation.

The device’s capacity is limited to a single switching function, making it suitable for simple control tasks. It does not support multiple channels or complex logic functions for internal linking of control commands. Control is always for a single load or a load group switched via the switch.

The touch sensor does not offer integrated security or authentication mechanisms for access beyond the usual protection functions of the Matter standard. Access protection and secure communication within the smart home system are ensured by Matter.

Commissioning is carried out by installation in a suitable frame and connection to the existing electrical wiring. Parameterisation and configuration of the switching functions are done via the eWeLink app, which allows easy assignment and control of devices. Status indicators on the device support operation monitoring and facilitate troubleshooting.

The switch is powered by a required supply voltage from the electrical network; the exact voltage depends on the regional installation and must be considered during planning. Installation is as a flush-mounted device fitted into a standard installation box. The compact design with a module width of approximately 41.5 mm allows integration into existing switch programmes.